{{settings.system.apacheconf_vhost}} {{settings.system.apacheconf_vhost}} {{settings.system.apacheconf_diroptions}} {{settings.system.apacheconf_diroptions}} {{settings.system.deactivateddocroot}} //service[@type='http']/general/commands {{settings.system.use_ssl}} {{settings.phpfpm.enabled}} {{settings.system.leenabled}} Require all granted ]]> "{{settings.system.letsencryptchallengepath}}/.well-known/acme-challenge/") # default listening port for IPv6 falls back to the IPv4 port include_shell "/usr/share/lighttpd/use-ipv6.pl " + server.port include_shell "/usr/share/lighttpd/create-mime.assign.pl" include_shell "/usr/share/lighttpd/include-conf-enabled.pl" ]]> //service[@type='http']/general/commands {{settings.system.apacheconf_vhost}} > /etc/lighttpd/lighttpd.conf]]> {{settings.system.apacheconf_vhost}} > /etc/lighttpd/lighttpd.conf]]> {{settings.system.apacheconf_diroptions}} > /etc/lighttpd/lighttpd.conf]]> {{settings.system.apacheconf_diroptions}} > /etc/lighttpd/lighttpd.conf]]> {{settings.phpfpm.enabled}} {{settings.system.mod_fcgid}} {{settings.system.leenabled}} {{settings.phpfpm.enabled}} {{settings.system.mod_fcgid}} //service[@type='http']/general/commands {{settings.phpfpm.enabled}} {{settings.system.mod_fcgid}} > /etc/bind/named.conf.local]]> # add these entries to the list if any speficied: ################################# # allow-dnsupdate-from A global setting to allow DNS updates from these IP ranges. # # allow-dnsupdate-from=127.0.0.0/8,::1 ################################# # also-notify When notifying a domain, also notify these nameservers # # also-notify= ################################# # any-to-tcp Answer ANY queries with tc=1, shunting to TCP # # any-to-tcp=no ################################# # cache-ttl Seconds to store packets in the PacketCache # # cache-ttl=20 ################################# # carbon-interval Number of seconds between carbon (graphite) updates # # carbon-interval=30 ################################# # carbon-ourname If set, overrides our reported hostname for carbon stats # # carbon-ourname= ################################# # carbon-server If set, send metrics in carbon (graphite) format to this server # # carbon-server= ################################# # chroot If set, chroot to this directory for more security # # chroot= ################################# # config-dir Location of configuration directory (pdns.conf) # config-dir=/etc/powerdns ################################# # config-name Name of this virtual configuration - will rename the binary image # # config-name= ################################# # control-console Debugging switch - don't use # # control-console=no ################################# # daemon Operate as a daemon # daemon=yes ################################# # default-ksk-algorithms Default KSK algorithms # # default-ksk-algorithms=rsasha256 ################################# # default-ksk-size Default KSK size (0 means default) # # default-ksk-size=0 ################################# # default-soa-mail mail address to insert in the SOA record if none set in the backend # # default-soa-mail= ################################# # default-soa-name name to insert in the SOA record if none set in the backend # # default-soa-name=a.misconfigured.powerdns.server ################################# # default-ttl Seconds a result is valid if not set otherwise # # default-ttl=3600 ################################# # default-zsk-algorithms Default ZSK algorithms # # default-zsk-algorithms=rsasha256 ################################# # default-zsk-size Default ZSK size (0 means default) # # default-zsk-size=0 ################################# # direct-dnskey Fetch DNSKEY RRs from backend during DNSKEY synthesis # # direct-dnskey=no ################################# # disable-axfr Disable zonetransfers but do allow TCP queries # # disable-axfr=no ################################# # disable-axfr-rectify Disable the rectify step during an outgoing AXFR. Only required for regression testing. # # disable-axfr-rectify=no ################################# # disable-tcp Do not listen to TCP queries # # disable-tcp=no ################################# # distributor-threads Default number of Distributor (backend) threads to start # # distributor-threads=3 ################################# # do-ipv6-additional-processing Do AAAA additional processing # # do-ipv6-additional-processing=yes ################################# # edns-subnet-processing If we should act on EDNS Subnet options # # edns-subnet-processing=no ################################# # entropy-source If set, read entropy from this file # # entropy-source=/dev/urandom ################################# # experimental-api-key REST API Static authentication key (required for API use) # # experimental-api-key= ################################# # experimental-api-readonly If the JSON API should disallow data modification # # experimental-api-readonly=no ################################# # experimental-dname-processing If we should support DNAME records # # experimental-dname-processing=no ################################# # experimental-dnsupdate Enable/Disable DNS update (RFC2136) support. Default is no. # # experimental-dnsupdate=no ################################# # experimental-json-interface If the webserver should serve JSON data # # experimental-json-interface=no ################################# # experimental-logfile Filename of the log file for JSON parser # # experimental-logfile=/var/log/pdns.log ################################# # forward-dnsupdate A global setting to allow DNS update packages that are for a Slave domain, to be forwarded to the master. # # forward-dnsupdate=yes ################################# # guardian Run within a guardian process # guardian=yes ################################# # include-dir Include *.conf files from this directory # # include-dir= ################################# # launch Which backends to launch and order to query them in # # launch= ################################# # load-modules Load this module - supply absolute or relative path # # load-modules= ################################# # local-address Local IP addresses to which we bind # local-address=,127.0.0.1 ################################# # local-address-nonexist-fail Fail to start if one or more of the local-address's do not exist on this server # # local-address-nonexist-fail=yes ################################# # local-ipv6 Local IP address to which we bind # # local-ipv6= ################################# # local-ipv6-nonexist-fail Fail to start if one or more of the local-ipv6 addresses do not exist on this server # # local-ipv6-nonexist-fail=yes ################################# # local-port The port on which we listen # # local-port=53 ################################# # log-dns-details If PDNS should log DNS non-erroneous details # # log-dns-details=no ################################# # log-dns-queries If PDNS should log all incoming DNS queries # # log-dns-queries=no ################################# # logging-facility Log under a specific facility # # logging-facility= ################################# # loglevel Amount of logging. Higher is more. Do not set below 3 # # loglevel=4 ################################# # lua-prequery-script Lua script with prequery handler # # lua-prequery-script= ################################# # master Act as a master # master=yes ################################# # max-cache-entries Maximum number of cache entries # # max-cache-entries=1000000 ################################# # max-ent-entries Maximum number of empty non-terminals in a zone # # max-ent-entries=100000 ################################# # max-nsec3-iterations Limit the number of NSEC3 hash iterations # # max-nsec3-iterations=500 ################################# # max-queue-length Maximum queuelength before considering situation lost # # max-queue-length=5000 ################################# # max-signature-cache-entries Maximum number of signatures cache entries # # max-signature-cache-entries= ################################# # max-tcp-connections Maximum number of TCP connections # # max-tcp-connections=10 ################################# # module-dir Default directory for modules # # module-dir=/usr/lib/TRIPLET/pdns ################################# # negquery-cache-ttl Seconds to store negative query results in the QueryCache # # negquery-cache-ttl=60 ################################# # no-shuffle Set this to prevent random shuffling of answers - for regression testing # # no-shuffle=off ################################# # only-notify Only send AXFR NOTIFY to these IP addresses or netmasks # # only-notify=0.0.0.0/0,::/0 ################################# # out-of-zone-additional-processing Do out of zone additional processing # # out-of-zone-additional-processing=yes ################################# # overload-queue-length Maximum queuelength moving to packetcache only # # overload-queue-length=0 ################################# # pipebackend-abi-version Version of the pipe backend ABI # # pipebackend-abi-version=1 ################################# # prevent-self-notification Don't send notifications to what we think is ourself # # prevent-self-notification=yes ################################# # query-cache-ttl Seconds to store query results in the QueryCache # # query-cache-ttl=20 ################################# # query-local-address Source IP address for sending queries # # query-local-address=0.0.0.0 ################################# # query-local-address6 Source IPv6 address for sending queries # # query-local-address6=:: ################################# # query-logging Hint backends that queries should be logged # # query-logging=no ################################# # queue-limit Maximum number of milliseconds to queue a query # # queue-limit=1500 ################################# # receiver-threads Default number of receiver threads to start # # receiver-threads=1 ################################# # retrieval-threads Number of AXFR-retrieval threads for slave operation # # retrieval-threads=2 ################################# # reuseport Enable higher performance on compliant kernels by using SO_REUSEPORT allowing each receiver thread to open its own socket # # reuseport=no ################################# # security-poll-suffix Domain name from which to query security update notifications # # security-poll-suffix=secpoll.powerdns.com. ################################# # send-root-referral Send out old-fashioned root-referral instead of ServFail in case of no authority # # send-root-referral=no ################################# # server-id Returned when queried for 'server.id' TXT or NSID, defaults to hostname - disabled or custom # # server-id= ################################# # setgid If set, change group id to this gid for more security # setgid=pdns ################################# # setuid If set, change user id to this uid for more security # setuid=pdns ################################# # signing-threads Default number of signer threads to start # # signing-threads=3 ################################# # slave Act as a slave # # slave=no ################################# # slave-cycle-interval Reschedule failed SOA serial checks once every .. seconds # # slave-cycle-interval=60 ################################# # slave-renotify If we should send out notifications for slaved updates # # slave-renotify=no ################################# # soa-expire-default Default SOA expire # # soa-expire-default=604800 ################################# # soa-minimum-ttl Default SOA minimum ttl # # soa-minimum-ttl=3600 ################################# # soa-refresh-default Default SOA refresh # # soa-refresh-default=10800 ################################# # soa-retry-default Default SOA retry # # soa-retry-default=3600 ################################# # socket-dir Where the controlsocket will live # # socket-dir=/var/run ################################# # tcp-control-address If set, PowerDNS can be controlled over TCP on this address # # tcp-control-address= ################################# # tcp-control-port If set, PowerDNS can be controlled over TCP on this address # # tcp-control-port=53000 ################################# # tcp-control-range If set, remote control of PowerDNS is possible over these networks only # # tcp-control-range=127.0.0.0/8, 10.0.0.0/8, 192.168.0.0/16, 172.16.0.0/12, ::1/128, fe80::/10 ################################# # tcp-control-secret If set, PowerDNS can be controlled over TCP after passing this secret # # tcp-control-secret= ################################# # traceback-handler Enable the traceback handler (Linux only) # # traceback-handler=yes ################################# # trusted-notification-proxy IP address of incoming notification proxy # # trusted-notification-proxy= ################################# # udp-truncation-threshold Maximum UDP response size before we truncate # # udp-truncation-threshold=1680 ################################# # version-string PowerDNS version in packets - full, anonymous, powerdns or custom # version-string=powerdns ################################# # webserver Start a webserver for monitoring # # webserver=no ################################# # webserver-address IP Address of webserver to listen on # # webserver-address=127.0.0.1 ################################# # webserver-allow-from Webserver access is only allowed from these subnets # # webserver-allow-from=0.0.0.0/0,::/0 ################################# # webserver-password Password required for accessing the webserver # # webserver-password= ################################# # webserver-port Port of webserver to listen on # # webserver-port=8081 ################################# # webserver-print-arguments If the webserver should print arguments # # webserver-print-arguments=no # include froxlor-bind-specific config include-dir=/etc/powerdns/froxlor/ ]]> # add these entries to the list if any speficied: ################################# # allow-dnsupdate-from A global setting to allow DNS updates from these IP ranges. # # allow-dnsupdate-from=127.0.0.0/8,::1 ################################# # also-notify When notifying a domain, also notify these nameservers # # also-notify= ################################# # any-to-tcp Answer ANY queries with tc=1, shunting to TCP # # any-to-tcp=no ################################# # cache-ttl Seconds to store packets in the PacketCache # # cache-ttl=20 ################################# # carbon-interval Number of seconds between carbon (graphite) updates # # carbon-interval=30 ################################# # carbon-ourname If set, overrides our reported hostname for carbon stats # # carbon-ourname= ################################# # carbon-server If set, send metrics in carbon (graphite) format to this server # # carbon-server= ################################# # chroot If set, chroot to this directory for more security # # chroot= ################################# # config-dir Location of configuration directory (pdns.conf) # config-dir=/etc/powerdns ################################# # config-name Name of this virtual configuration - will rename the binary image # # config-name= ################################# # control-console Debugging switch - don't use # # control-console=no ################################# # daemon Operate as a daemon # daemon=yes ################################# # default-ksk-algorithms Default KSK algorithms # # default-ksk-algorithms=rsasha256 ################################# # default-ksk-size Default KSK size (0 means default) # # default-ksk-size=0 ################################# # default-soa-mail mail address to insert in the SOA record if none set in the backend # # default-soa-mail= ################################# # default-soa-name name to insert in the SOA record if none set in the backend # # default-soa-name=a.misconfigured.powerdns.server ################################# # default-ttl Seconds a result is valid if not set otherwise # # default-ttl=3600 ################################# # default-zsk-algorithms Default ZSK algorithms # # default-zsk-algorithms=rsasha256 ################################# # default-zsk-size Default ZSK size (0 means default) # # default-zsk-size=0 ################################# # direct-dnskey Fetch DNSKEY RRs from backend during DNSKEY synthesis # # direct-dnskey=no ################################# # disable-axfr Disable zonetransfers but do allow TCP queries # # disable-axfr=no ################################# # disable-axfr-rectify Disable the rectify step during an outgoing AXFR. Only required for regression testing. # # disable-axfr-rectify=no ################################# # disable-tcp Do not listen to TCP queries # # disable-tcp=no ################################# # distributor-threads Default number of Distributor (backend) threads to start # # distributor-threads=3 ################################# # do-ipv6-additional-processing Do AAAA additional processing # # do-ipv6-additional-processing=yes ################################# # edns-subnet-processing If we should act on EDNS Subnet options # # edns-subnet-processing=no ################################# # entropy-source If set, read entropy from this file # # entropy-source=/dev/urandom ################################# # experimental-api-key REST API Static authentication key (required for API use) # # experimental-api-key= ################################# # experimental-api-readonly If the JSON API should disallow data modification # # experimental-api-readonly=no ################################# # experimental-dname-processing If we should support DNAME records # # experimental-dname-processing=no ################################# # experimental-dnsupdate Enable/Disable DNS update (RFC2136) support. Default is no. # # experimental-dnsupdate=no ################################# # experimental-json-interface If the webserver should serve JSON data # # experimental-json-interface=no ################################# # experimental-logfile Filename of the log file for JSON parser # # experimental-logfile=/var/log/pdns.log ################################# # forward-dnsupdate A global setting to allow DNS update packages that are for a Slave domain, to be forwarded to the master. # # forward-dnsupdate=yes ################################# # guardian Run within a guardian process # guardian=yes ################################# # include-dir Include *.conf files from this directory # # include-dir= ################################# # launch Which backends to launch and order to query them in # # launch= launch=bind ################################# # load-modules Load this module - supply absolute or relative path # # load-modules= ################################# # local-address Local IP addresses to which we bind # local-address=,127.0.0.1 ################################# # local-address-nonexist-fail Fail to start if one or more of the local-address's do not exist on this server # # local-address-nonexist-fail=yes ################################# # local-ipv6 Local IP address to which we bind # # local-ipv6= ################################# # local-ipv6-nonexist-fail Fail to start if one or more of the local-ipv6 addresses do not exist on this server # # local-ipv6-nonexist-fail=yes ################################# # local-port The port on which we listen # # local-port=53 ################################# # log-dns-details If PDNS should log DNS non-erroneous details # # log-dns-details=no ################################# # log-dns-queries If PDNS should log all incoming DNS queries # # log-dns-queries=no ################################# # logging-facility Log under a specific facility # # logging-facility= ################################# # loglevel Amount of logging. Higher is more. Do not set below 3 # # loglevel=4 ################################# # lua-prequery-script Lua script with prequery handler # # lua-prequery-script= ################################# # master Act as a master # master=yes ################################# # max-cache-entries Maximum number of cache entries # # max-cache-entries=1000000 ################################# # max-ent-entries Maximum number of empty non-terminals in a zone # # max-ent-entries=100000 ################################# # max-nsec3-iterations Limit the number of NSEC3 hash iterations # # max-nsec3-iterations=500 ################################# # max-queue-length Maximum queuelength before considering situation lost # # max-queue-length=5000 ################################# # max-signature-cache-entries Maximum number of signatures cache entries # # max-signature-cache-entries= ################################# # max-tcp-connections Maximum number of TCP connections # # max-tcp-connections=10 ################################# # module-dir Default directory for modules # # module-dir=/usr/lib/TRIPLET/pdns ################################# # negquery-cache-ttl Seconds to store negative query results in the QueryCache # # negquery-cache-ttl=60 ################################# # no-shuffle Set this to prevent random shuffling of answers - for regression testing # # no-shuffle=off ################################# # only-notify Only send AXFR NOTIFY to these IP addresses or netmasks # # only-notify=0.0.0.0/0,::/0 ################################# # out-of-zone-additional-processing Do out of zone additional processing # # out-of-zone-additional-processing=yes ################################# # overload-queue-length Maximum queuelength moving to packetcache only # # overload-queue-length=0 ################################# # pipebackend-abi-version Version of the pipe backend ABI # # pipebackend-abi-version=1 ################################# # prevent-self-notification Don't send notifications to what we think is ourself # # prevent-self-notification=yes ################################# # query-cache-ttl Seconds to store query results in the QueryCache # # query-cache-ttl=20 ################################# # query-local-address Source IP address for sending queries # # query-local-address=0.0.0.0 ################################# # query-local-address6 Source IPv6 address for sending queries # # query-local-address6=:: ################################# # query-logging Hint backends that queries should be logged # # query-logging=no ################################# # queue-limit Maximum number of milliseconds to queue a query # # queue-limit=1500 ################################# # receiver-threads Default number of receiver threads to start # # receiver-threads=1 ################################# # retrieval-threads Number of AXFR-retrieval threads for slave operation # # retrieval-threads=2 ################################# # reuseport Enable higher performance on compliant kernels by using SO_REUSEPORT allowing each receiver thread to open its own socket # # reuseport=no ################################# # security-poll-suffix Domain name from which to query security update notifications # # security-poll-suffix=secpoll.powerdns.com. ################################# # send-root-referral Send out old-fashioned root-referral instead of ServFail in case of no authority # # send-root-referral=no ################################# # server-id Returned when queried for 'server.id' TXT or NSID, defaults to hostname - disabled or custom # # server-id= ################################# # setgid If set, change group id to this gid for more security # setgid=pdns ################################# # setuid If set, change user id to this uid for more security # setuid=pdns ################################# # signing-threads Default number of signer threads to start # # signing-threads=3 ################################# # slave Act as a slave # # slave=no ################################# # slave-cycle-interval Reschedule failed SOA serial checks once every .. seconds # # slave-cycle-interval=60 ################################# # slave-renotify If we should send out notifications for slaved updates # # slave-renotify=no ################################# # soa-expire-default Default SOA expire # # soa-expire-default=604800 ################################# # soa-minimum-ttl Default SOA minimum ttl # # soa-minimum-ttl=3600 ################################# # soa-refresh-default Default SOA refresh # # soa-refresh-default=10800 ################################# # soa-retry-default Default SOA retry # # soa-retry-default=3600 ################################# # socket-dir Where the controlsocket will live # # socket-dir=/var/run ################################# # tcp-control-address If set, PowerDNS can be controlled over TCP on this address # # tcp-control-address= ################################# # tcp-control-port If set, PowerDNS can be controlled over TCP on this address # # tcp-control-port=53000 ################################# # tcp-control-range If set, remote control of PowerDNS is possible over these networks only # # tcp-control-range=127.0.0.0/8, 10.0.0.0/8, 192.168.0.0/16, 172.16.0.0/12, ::1/128, fe80::/10 ################################# # tcp-control-secret If set, PowerDNS can be controlled over TCP after passing this secret # # tcp-control-secret= ################################# # traceback-handler Enable the traceback handler (Linux only) # # traceback-handler=yes ################################# # trusted-notification-proxy IP address of incoming notification proxy # # trusted-notification-proxy= ################################# # udp-truncation-threshold Maximum UDP response size before we truncate # # udp-truncation-threshold=1680 ################################# # version-string PowerDNS version in packets - full, anonymous, powerdns or custom # version-string=powerdns ################################# # webserver Start a webserver for monitoring # # webserver=no ################################# # webserver-address IP Address of webserver to listen on # # webserver-address=127.0.0.1 ################################# # webserver-allow-from Webserver access is only allowed from these subnets # # webserver-allow-from=0.0.0.0/0,::/0 ################################# # webserver-password Password required for accessing the webserver # # webserver-password= ################################# # webserver-port Port of webserver to listen on # # webserver-port=8081 ################################# # webserver-print-arguments If the webserver should print arguments # # webserver-print-arguments=no # include froxlor-bind-specific config include-dir=/etc/powerdns/froxlor/ ]]> named.conf # How often to check for zone changes. See 'Operation' section. bind-check-interval=180 # Uncomment to enable Huffman compression on zone data. # Currently saves around 20% of memory actually used, but slows down operation. # bind-enable-huffman ]]> {{settings.system.vmail_gid}} {{settings.system.vmail_uid}} password = dbname = hosts = query = SELECT destination FROM mail_virtual AS v, panel_customers AS c WHERE c.customerid = v.customerid AND c.deactivated = 0 AND v.email = '%s' AND trim(v.destination) <> '' ]]> password = dbname = hosts = query = SELECT domain FROM panel_domains WHERE domain = '%s' AND isemaildomain = '1' ]]> password = dbname = expansion_limit = 1 hosts = query = SELECT CONCAT(homedir,maildir) FROM mail_users WHERE email = '%s' ]]> password = dbname = hosts = query = SELECT DISTINCT username FROM mail_users WHERE email in ((SELECT mail_virtual.email_full FROM mail_virtual WHERE mail_virtual.email = '%s' UNION SELECT mail_virtual.destination FROM mail_virtual WHERE mail_virtual.email = '%s')); ]]> password = dbname = expansion_limit = 1 hosts = query = SELECT uid FROM mail_users WHERE email = '%s' ]]> password = dbname = expansion_limit = 1 hosts = query = SELECT gid FROM mail_users WHERE email = '%s' ]]> ]]> //service[@type='smtp']/general/commands[@index=1] //service[@type='smtp']/general/installs[@index=1] //service[@type='smtp']/general/commands[@index=2] # SENDING MAIL # # The myorigin parameter specifies the domain that locally-posted # mail appears to come from. The default is to append $myhostname, # which is fine for small sites. If you run a domain with multiple # machines, you should (1) change this to $mydomain and (2) set up # a domain-wide alias database that aliases each user to # user@that.users.mailhost. # # For the sake of consistency between sender and recipient addresses, # myorigin also specifies the default domain name that is appended # to recipient addresses that have no @domain part. # # Debian GNU/Linux specific: Specifying a file name will cause the # first line of that file to be used as the name. The Debian default # is /etc/mailname. # #myorigin = /etc/mailname #myorigin = $myhostname #myorigin = $mydomain # RECEIVING MAIL # The inet_interfaces parameter specifies the network interface # addresses that this mail system receives mail on. By default, # the software claims all active interfaces on the machine. The # parameter also controls delivery of mail to user@[ip.address]. # # See also the proxy_interfaces parameter, for network addresses that # are forwarded to us via a proxy or network address translator. # # Note: you need to stop/start Postfix when this parameter changes. # inet_interfaces = all #inet_interfaces = $myhostname #inet_interfaces = $myhostname, localhost # The proxy_interfaces parameter specifies the network interface # addresses that this mail system receives mail on by way of a # proxy or network address translation unit. This setting extends # the address list specified with the inet_interfaces parameter. # # You must specify your proxy/NAT addresses when your system is a # backup MX host for other domains, otherwise mail delivery loops # will happen when the primary MX host is down. # #proxy_interfaces = #proxy_interfaces = 1.2.3.4 # The mydestination parameter specifies the list of domains that this # machine considers itself the final destination for. # # These domains are routed to the delivery agent specified with the # local_transport parameter setting. By default, that is the UNIX # compatible delivery agent that lookups all recipients in /etc/passwd # and /etc/aliases or their equivalent. # # The default is $myhostname + localhost.$mydomain. On a mail domain # gateway, you should also include $mydomain. # # Do not specify the names of virtual domains - those domains are # specified elsewhere (see VIRTUAL_README). # # Do not specify the names of domains that this machine is backup MX # host for. Specify those names via the relay_domains settings for # the SMTP server, or use permit_mx_backup if you are lazy (see # STANDARD_CONFIGURATION_README). # # The local machine is always the final destination for mail addressed # to user@[the.net.work.address] of an interface that the mail system # receives mail on (see the inet_interfaces parameter). # # Specify a list of host or domain names, /file/name or type:table # patterns, separated by commas and/or whitespace. A /file/name # pattern is replaced by its contents; a type:table is matched when # a name matches a lookup key (the right-hand side is ignored). # Continue long lines by starting the next line with whitespace. # # See also below, section "REJECTING MAIL FOR UNKNOWN LOCAL USERS". # #mydestination = $myhostname, localhost.$mydomain, localhost mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain #mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain, # mail.$mydomain, www.$mydomain, ftp.$mydomain # REJECTING MAIL FOR UNKNOWN LOCAL USERS # # The local_recipient_maps parameter specifies optional lookup tables # with all names or addresses of users that are local with respect # to $mydestination, $inet_interfaces or $proxy_interfaces. # # If this parameter is defined, then the SMTP server will reject # mail for unknown local users. This parameter is defined by default. # # To turn off local recipient checking in the SMTP server, specify # local_recipient_maps = (i.e. empty). # # The default setting assumes that you use the default Postfix local # delivery agent for local delivery. You need to update the # local_recipient_maps setting if: # # - You define $mydestination domain recipients in files other than # /etc/passwd, /etc/aliases, or the $virtual_alias_maps files. # For example, you define $mydestination domain recipients in # the $virtual_mailbox_maps files. # # - You redefine the local delivery agent in master.cf. # # - You redefine the "local_transport" setting in main.cf. # # - You use the "luser_relay", "mailbox_transport", or "fallback_transport" # feature of the Postfix local delivery agent (see local(8)). # # Details are described in the LOCAL_RECIPIENT_README file. # # Beware: if the Postfix SMTP server runs chrooted, you probably have # to access the passwd file via the proxymap service, in order to # overcome chroot restrictions. The alternative, having a copy of # the system passwd file in the chroot jail is just not practical. # # The right-hand side of the lookup tables is conveniently ignored. # In the left-hand side, specify a bare username, an @domain.tld # wild-card, or specify a user@domain.tld address. # #local_recipient_maps = unix:passwd.byname $alias_maps #local_recipient_maps = proxy:unix:passwd.byname $alias_maps #local_recipient_maps = # The unknown_local_recipient_reject_code specifies the SMTP server # response code when a recipient domain matches $mydestination or # ${proxy,inet}_interfaces, while $local_recipient_maps is non-empty # and the recipient address or address local-part is not found. # # The default setting is 550 (reject mail) but it is safer to start # with 450 (try again later) until you are certain that your # local_recipient_maps settings are OK. # unknown_local_recipient_reject_code = 550 # TRUST AND RELAY CONTROL # The mynetworks parameter specifies the list of "trusted" SMTP # clients that have more privileges than "strangers". # # In particular, "trusted" SMTP clients are allowed to relay mail # through Postfix. See the smtpd_recipient_restrictions parameter # in postconf(5). # # You can specify the list of "trusted" network addresses by hand # or you can let Postfix do it for you (which is the default). # # By default (mynetworks_style = subnet), Postfix "trusts" SMTP # clients in the same IP subnetworks as the local machine. # On Linux, this does works correctly only with interfaces specified # with the "ifconfig" command. # # Specify "mynetworks_style = class" when Postfix should "trust" SMTP # clients in the same IP class A/B/C networks as the local machine. # Don't do this with a dialup site - it would cause Postfix to "trust" # your entire provider's network. Instead, specify an explicit # mynetworks list by hand, as described below. # # Specify "mynetworks_style = host" when Postfix should "trust" # only the local machine. # #mynetworks_style = class #mynetworks_style = subnet #mynetworks_style = host # Alternatively, you can specify the mynetworks list by hand, in # which case Postfix ignores the mynetworks_style setting. # # Specify an explicit list of network/netmask patterns, where the # mask specifies the number of bits in the network part of a host # address. # # You can also specify the absolute pathname of a pattern file instead # of listing the patterns here. Specify type:table for table-based lookups # (the value on the table right-hand side is not used). # #mynetworks = 168.100.189.0/28, 127.0.0.0/8 #mynetworks = $config_directory/mynetworks #mynetworks = hash:/etc/postfix/network_table mynetworks = 127.0.0.0/8 # The relay_domains parameter restricts what destinations this system will # relay mail to. See the smtpd_recipient_restrictions description in # postconf(5) for detailed information. # # By default, Postfix relays mail # - from "trusted" clients (IP address matches $mynetworks) to any destination, # - from "untrusted" clients to destinations that match $relay_domains or # subdomains thereof, except addresses with sender-specified routing. # The default relay_domains value is $mydestination. # # In addition to the above, the Postfix SMTP server by default accepts mail # that Postfix is final destination for: # - destinations that match $inet_interfaces or $proxy_interfaces, # - destinations that match $mydestination # - destinations that match $virtual_alias_domains, # - destinations that match $virtual_mailbox_domains. # These destinations do not need to be listed in $relay_domains. # # Specify a list of hosts or domains, /file/name patterns or type:name # lookup tables, separated by commas and/or whitespace. Continue # long lines by starting the next line with whitespace. A file name # is replaced by its contents; a type:name table is matched when a # (parent) domain appears as lookup key. # # NOTE: Postfix will not automatically forward mail for domains that # list this system as their primary or backup MX host. See the # permit_mx_backup restriction description in postconf(5). # #relay_domains = $mydestination # INTERNET OR INTRANET # The relayhost parameter specifies the default host to send mail to # when no entry is matched in the optional transport(5) table. When # no relayhost is given, mail is routed directly to the destination. # # On an intranet, specify the organizational domain name. If your # internal DNS uses no MX records, specify the name of the intranet # gateway host instead. # # In the case of SMTP, specify a domain, host, host:port, [host]:port, # [address] or [address]:port; the form [host] turns off MX lookups. # # If you're connected via UUCP, see also the default_transport parameter. # #relayhost = $mydomain #relayhost = [gateway.my.domain] #relayhost = [mailserver.isp.tld] #relayhost = uucphost #relayhost = [an.ip.add.ress] # REJECTING UNKNOWN RELAY USERS # # The relay_recipient_maps parameter specifies optional lookup tables # with all addresses in the domains that match $relay_domains. # # If this parameter is defined, then the SMTP server will reject # mail for unknown relay users. This feature is off by default. # # The right-hand side of the lookup tables is conveniently ignored. # In the left-hand side, specify an @domain.tld wild-card, or specify # a user@domain.tld address. # #relay_recipient_maps = hash:/etc/postfix/relay_recipients # INPUT RATE CONTROL # # The in_flow_delay configuration parameter implements mail input # flow control. This feature is turned on by default, although it # still needs further development (it's disabled on SCO UNIX due # to an SCO bug). # # A Postfix process will pause for $in_flow_delay seconds before # accepting a new message, when the message arrival rate exceeds the # message delivery rate. With the default 100 SMTP server process # limit, this limits the mail inflow to 100 messages a second more # than the number of messages delivered per second. # # Specify 0 to disable the feature. Valid delays are 0..10. # #in_flow_delay = 1s # ADDRESS REWRITING # # The ADDRESS_REWRITING_README document gives information about # address masquerading or other forms of address rewriting including # username->Firstname.Lastname mapping. # ADDRESS REDIRECTION (VIRTUAL DOMAIN) # # The VIRTUAL_README document gives information about the many forms # of domain hosting that Postfix supports. # "USER HAS MOVED" BOUNCE MESSAGES # # See the discussion in the ADDRESS_REWRITING_README document. # TRANSPORT MAP # # See the discussion in the ADDRESS_REWRITING_README document. # ALIAS DATABASE # # The alias_maps parameter specifies the list of alias databases used # by the local delivery agent. The default list is system dependent. # # On systems with NIS, the default is to search the local alias # database, then the NIS alias database. See aliases(5) for syntax # details. # # If you change the alias database, run "postalias /etc/aliases" (or # wherever your system stores the mail alias file), or simply run # "newaliases" to build the necessary DBM or DB file. # # It will take a minute or so before changes become visible. Use # "postfix reload" to eliminate the delay. # #alias_maps = dbm:/etc/aliases #alias_maps = hash:/etc/aliases #alias_maps = hash:/etc/aliases, nis:mail.aliases #alias_maps = netinfo:/aliases # The alias_database parameter specifies the alias database(s) that # are built with "newaliases" or "sendmail -bi". This is a separate # configuration parameter, because alias_maps (see above) may specify # tables that are not necessarily all under control by Postfix. # #alias_database = dbm:/etc/aliases #alias_database = dbm:/etc/mail/aliases #alias_database = hash:/etc/aliases #alias_database = hash:/etc/aliases, hash:/opt/majordomo/aliases # ADDRESS EXTENSIONS (e.g., user+foo) # # The recipient_delimiter parameter specifies the separator between # user names and address extensions (user+foo). See canonical(5), # local(8), relocated(5) and virtual(5) for the effects this has on # aliases, canonical, virtual, relocated and .forward file lookups. # Basically, the software tries user+foo and .forward+foo before # trying user and .forward. # #recipient_delimiter = + # DELIVERY TO MAILBOX # # The home_mailbox parameter specifies the optional pathname of a # mailbox file relative to a user's home directory. The default # mailbox file is /var/spool/mail/user or /var/mail/user. Specify # "Maildir/" for qmail-style delivery (the / is required). # #home_mailbox = Mailbox #home_mailbox = Maildir/ # The mail_spool_directory parameter specifies the directory where # UNIX-style mailboxes are kept. The default setting depends on the # system type. # #mail_spool_directory = /var/mail #mail_spool_directory = /var/spool/mail # The mailbox_command parameter specifies the optional external # command to use instead of mailbox delivery. The command is run as # the recipient with proper HOME, SHELL and LOGNAME environment settings. # Exception: delivery for root is done as $default_user. # # Other environment variables of interest: USER (recipient username), # EXTENSION (address extension), DOMAIN (domain part of address), # and LOCAL (the address localpart). # # Unlike other Postfix configuration parameters, the mailbox_command # parameter is not subjected to $parameter substitutions. This is to # make it easier to specify shell syntax (see example below). # # Avoid shell meta characters because they will force Postfix to run # an expensive shell process. Procmail alone is expensive enough. # # IF YOU USE THIS TO DELIVER MAIL SYSTEM-WIDE, YOU MUST SET UP AN # ALIAS THAT FORWARDS MAIL FOR ROOT TO A REAL USER. # mailbox_command = /usr/lib/dovecot/deliver #mailbox_command = /usr/bin/procmail -a "$EXTENSION" # The mailbox_transport specifies the optional transport in master.cf # to use after processing aliases and .forward files. This parameter # has precedence over the mailbox_command, fallback_transport and # luser_relay parameters. # # Specify a string of the form transport:nexthop, where transport is # the name of a mail delivery transport defined in master.cf. The # :nexthop part is optional. For more details see the sample transport # configuration file. # # NOTE: if you use this feature for accounts not in the UNIX password # file, then you must update the "local_recipient_maps" setting in # the main.cf file, otherwise the SMTP server will reject mail for # non-UNIX accounts with "User unknown in local recipient table". # # Cyrus IMAP over LMTP. Specify ``lmtpunix cmd="lmtpd" # listen="/var/imap/socket/lmtp" prefork=0'' in cyrus.conf. #mailbox_transport = lmtp:unix:/var/imap/socket/lmtp # # Cyrus IMAP via command line. Uncomment the "cyrus...pipe" and # subsequent line in master.cf. #mailbox_transport = cyrus # The fallback_transport specifies the optional transport in master.cf # to use for recipients that are not found in the UNIX passwd database. # This parameter has precedence over the luser_relay parameter. # # Specify a string of the form transport:nexthop, where transport is # the name of a mail delivery transport defined in master.cf. The # :nexthop part is optional. For more details see the sample transport # configuration file. # # NOTE: if you use this feature for accounts not in the UNIX password # file, then you must update the "local_recipient_maps" setting in # the main.cf file, otherwise the SMTP server will reject mail for # non-UNIX accounts with "User unknown in local recipient table". # #fallback_transport = lmtp:unix:/file/name #fallback_transport = cyrus #fallback_transport = # The luser_relay parameter specifies an optional destination address # for unknown recipients. By default, mail for unknown@$mydestination, # unknown@[$inet_interfaces] or unknown@[$proxy_interfaces] is returned # as undeliverable. # # The following expansions are done on luser_relay: $user (recipient # username), $shell (recipient shell), $home (recipient home directory), # $recipient (full recipient address), $extension (recipient address # extension), $domain (recipient domain), $local (entire recipient # localpart), $recipient_delimiter. Specify ${name?value} or # ${name:value} to expand value only when $name does (does not) exist. # # luser_relay works only for the default Postfix local delivery agent. # # NOTE: if you use this feature for accounts not in the UNIX password # file, then you must specify "local_recipient_maps =" (i.e. empty) in # the main.cf file, otherwise the SMTP server will reject mail for # non-UNIX accounts with "User unknown in local recipient table". # #luser_relay = $user@other.host #luser_relay = $local@other.host #luser_relay = admin+$local # JUNK MAIL CONTROLS # # The controls listed here are only a very small subset. The file # SMTPD_ACCESS_README provides an overview. # The header_checks parameter specifies an optional table with patterns # that each logical message header is matched against, including # headers that span multiple physical lines. # # By default, these patterns also apply to MIME headers and to the # headers of attached messages. With older Postfix versions, MIME and # attached message headers were treated as body text. # # For details, see "man header_checks". # #header_checks = regexp:/etc/postfix/header_checks # FAST ETRN SERVICE # # Postfix maintains per-destination logfiles with information about # deferred mail, so that mail can be flushed quickly with the SMTP # "ETRN domain.tld" command, or by executing "sendmail -qRdomain.tld". # See the ETRN_README document for a detailed description. # # The fast_flush_domains parameter controls what destinations are # eligible for this service. By default, they are all domains that # this server is willing to relay mail to. # #fast_flush_domains = $relay_domains # SHOW SOFTWARE VERSION OR NOT # # The smtpd_banner parameter specifies the text that follows the 220 # code in the SMTP server's greeting banner. Some people like to see # the mail version advertised. By default, Postfix shows no version. # # You MUST specify $myhostname at the start of the text. That is an # RFC requirement. Postfix itself does not care. # #smtpd_banner = $myhostname ESMTP $mail_name #smtpd_banner = $myhostname ESMTP $mail_name ($mail_version) smtpd_banner = $myhostname ESMTP $mail_name (Debian/GNU) # PARALLEL DELIVERY TO THE SAME DESTINATION # # How many parallel deliveries to the same user or domain? With local # delivery, it does not make sense to do massively parallel delivery # to the same user, because mailbox updates must happen sequentially, # and expensive pipelines in .forward files can cause disasters when # too many are run at the same time. With SMTP deliveries, 10 # simultaneous connections to the same domain could be sufficient to # raise eyebrows. # # Each message delivery transport has its XXX_destination_concurrency_limit # parameter. The default is $default_destination_concurrency_limit for # most delivery transports. For the local delivery agent the default is 2. #local_destination_concurrency_limit = 2 #default_destination_concurrency_limit = 20 # DEBUGGING CONTROL # # The debug_peer_level parameter specifies the increment in verbose # logging level when an SMTP client or server host name or address # matches a pattern in the debug_peer_list parameter. # #debug_peer_level = 2 # The debug_peer_list parameter specifies an optional list of domain # or network patterns, /file/name patterns or type:name tables. When # an SMTP client or server host name or address matches a pattern, # increase the verbose logging level by the amount specified in the # debug_peer_level parameter. # #debug_peer_list = 127.0.0.1 #debug_peer_list = some.domain # The debugger_command specifies the external command that is executed # when a Postfix daemon program is run with the -D option. # # Use "command .. & sleep 5" so that the debugger can attach before # the process marches on. If you use an X-based debugger, be sure to # set up your XAUTHORITY environment variable before starting Postfix. # debugger_command = PATH=/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin ddd $daemon_directory/$process_name $process_id & sleep 5 # If you can't use X, use this to capture the call stack when a # daemon crashes. The result is in a file in the configuration # directory, and is named after the process name and the process ID. # # debugger_command = # PATH=/bin:/usr/bin:/usr/local/bin; export PATH; (echo cont; # echo where) | gdb $daemon_directory/$process_name $process_id 2>&1 # >$config_directory/$process_name.$process_id.log & sleep 5 # # Another possibility is to run gdb under a detached screen session. # To attach to the screen sesssion, su root and run "screen -r # " where uniquely matches one of the detached # sessions (from "screen -list"). # # debugger_command = # PATH=/bin:/usr/bin:/sbin:/usr/sbin; export PATH; screen # -dmS $process_name gdb $daemon_directory/$process_name # $process_id & sleep 1 # INSTALL-TIME CONFIGURATION INFORMATION # # The following parameters are used when installing a new Postfix version. # # sendmail_path: The full pathname of the Postfix sendmail command. # This is the Sendmail-compatible mail posting interface. # sendmail_path = /usr/sbin/sendmail # newaliases_path: The full pathname of the Postfix newaliases command. # This is the Sendmail-compatible command to build alias databases. # newaliases_path = /usr/bin/newaliases # mailq_path: The full pathname of the Postfix mailq command. This # is the Sendmail-compatible mail queue listing command. # mailq_path = /usr/bin/mailq # setgid_group: The group for mail submission and queue management # commands. This must be a group name with a numerical group ID that # is not shared with other accounts, not even with the Postfix account. # setgid_group = postdrop # html_directory: The location of the Postfix HTML documentation. # html_directory = no # manpage_directory: The location of the Postfix on-line manual pages. # manpage_directory = /usr/share/man # sample_directory: The location of the Postfix sample configuration files. # This parameter is obsolete as of Postfix 2.1. # sample_directory = /usr/share/doc/postfix # readme_directory: The location of the Postfix README files. # readme_directory = /usr/share/doc/postfix inet_protocols = ipv4 append_dot_mydomain = no biff = no smtpd_helo_required = yes smtpd_recipient_restrictions = permit_mynetworks, permit_sasl_authenticated, reject_unauth_destination, reject_unauth_pipelining, reject_non_fqdn_recipient smtpd_sender_restrictions = permit_mynetworks, reject_sender_login_mismatch, permit_sasl_authenticated, reject_unknown_helo_hostname, reject_unknown_recipient_domain, reject_unknown_sender_domain smtpd_client_restrictions = permit_mynetworks, permit_sasl_authenticated, reject_unknown_client_hostname # Postfix 2.10 requires this option. Postfix < 2.10 ignores this. # The option is intentionally left empty. smtpd_relay_restrictions = # Maximum size of Message in bytes (50MB) message_size_limit = 52428800 ## SASL Auth Settings smtpd_sasl_auth_enable = yes smtpd_sasl_local_domain = $myhostname broken_sasl_auth_clients = yes ## Dovecot Settings for deliver, SASL Auth and virtual transport smtpd_sasl_type = dovecot virtual_transport = dovecot dovecot_destination_recipient_limit = 1 smtpd_sasl_path = private/auth # Virtual delivery settings virtual_mailbox_base = / virtual_mailbox_maps = mysql:/etc/postfix/mysql-virtual_mailbox_maps.cf virtual_mailbox_domains = mysql:/etc/postfix/mysql-virtual_mailbox_domains.cf virtual_alias_maps = mysql:/etc/postfix/mysql-virtual_alias_maps.cf smtpd_sender_login_maps = mysql:/etc/postfix/mysql-virtual_sender_permissions.cf virtual_uid_maps = static: virtual_gid_maps = static: # Local delivery settings local_transport = local alias_maps = $alias_database # Default Mailbox size, is set to 0 which means unlimited! mailbox_size_limit = 0 virtual_mailbox_limit = 0 ### TLS settings ### ## TLS for outgoing mails from the server to another server #smtp_tls_security_level = may #smtp_tls_note_starttls_offer = yes ## TLS for incoming connections (clients or other mail servers) #smtpd_tls_security_level = may #smtpd_tls_cert_file = /etc/ssl/server/.pem #smtpd_tls_key_file = $smtpd_tls_cert_file #smtpd_tls_CAfile = /etc/ssl/certs/ca-certificates.crt #smtpd_tls_loglevel = 1 #smtpd_tls_received_header = yes ]]> //service[@type='smtp']/general/files[@index=0] //service[@type='smtp']/general/commands[@index=3] to select which instance is used (an alternative # to -c ). The instance name is also added to Dovecot processes # in ps output. #instance_name = dovecot # Greeting message for clients. #login_greeting = Dovecot ready. # Space separated list of trusted network ranges. Connections from these # IPs are allowed to override their IP addresses and ports (for logging and # for authentication checks). disable_plaintext_auth is also ignored for # these networks. Typically you'd specify your IMAP proxy servers here. #login_trusted_networks = # Space separated list of login access check sockets (e.g. tcpwrap) #login_access_sockets = # With proxy_maybe=yes if proxy destination matches any of these IPs, don't do # proxying. This isn't necessary normally, but may be useful if the destination # IP is e.g. a load balancer's IP. #auth_proxy_self = # Show more verbose process titles (in ps). Currently shows user name and # IP address. Useful for seeing who are actually using the IMAP processes # (eg. shared mailboxes or if same uid is used for multiple accounts). #verbose_proctitle = no # Should all processes be killed when Dovecot master process shuts down. # Setting this to "no" means that Dovecot can be upgraded without # forcing existing client connections to close (although that could also be # a problem if the upgrade is e.g. because of a security fix). #shutdown_clients = yes # If non-zero, run mail commands via this many connections to doveadm server, # instead of running them directly in the same process. #doveadm_worker_count = 0 # UNIX socket or host:port used for connecting to doveadm server #doveadm_socket_path = doveadm-server # Space separated list of environment variables that are preserved on Dovecot # startup and passed down to all of its child processes. You can also give # key=value pairs to always set specific settings. #import_environment = TZ ## ## Dictionary server settings ## # Dictionary can be used to store key=value lists. This is used by several # plugins. The dictionary can be accessed either directly or though a # dictionary server. The following dict block maps dictionary names to URIs # when the server is used. These can then be referenced using URIs in format # "proxy::". dict { #quota = mysql:/etc/dovecot/dovecot-dict-sql.conf.ext #expire = sqlite:/etc/dovecot/dovecot-dict-sql.conf.ext } # Most of the actual configuration gets included below. The filenames are # first sorted by their ASCII value and parsed in that order. The 00-prefixes # in filenames are intended to make it easier to understand the ordering. !include conf.d/*.conf # A config file can also tried to be included without giving an error if # it's not found: !include_try local.conf ]]> dbname= user= password= # Default password scheme. # # List of supported schemes is in # http://wiki2.dovecot.org/Authentication/PasswordSchemes # default_pass_scheme = CRYPT # passdb query to retrieve the password. It can return fields: # password - The user's password. This field must be returned. # user - user@domain from the database. Needed with case-insensitive lookups. # username and domain - An alternative way to represent the "user" field. # # The "user" field is often necessary with case-insensitive lookups to avoid # e.g. "name" and "nAme" logins creating two different mail directories. If # your user and domain names are in separate fields, you can return "username" # and "domain" fields instead of "user". # # The query can also return other fields which have a special meaning, see # http://wiki2.dovecot.org/PasswordDatabase/ExtraFields # # Commonly used available substitutions (see http://wiki2.dovecot.org/Variables # for full list): # %u = entire user@domain # %n = user part of user@domain # %d = domain part of user@domain # # Note that these can be used only as input to SQL query. If the query outputs # any of these substitutions, they're not touched. Otherwise it would be # difficult to have eg. usernames containing '%' characters. # # Example: # password_query = SELECT userid AS user, pw AS password \ # FROM users WHERE userid = '%u' AND active = 'Y' # #password_query = \ # SELECT username, domain, password \ # FROM users WHERE username = '%n' AND domain = '%d' # userdb query to retrieve the user information. It can return fields: # uid - System UID (overrides mail_uid setting) # gid - System GID (overrides mail_gid setting) # home - Home directory # mail - Mail location (overrides mail_location setting) # # None of these are strictly required. If you use a single UID and GID, and # home or mail directory fits to a template string, you could use userdb static # instead. For a list of all fields that can be returned, see # http://wiki2.dovecot.org/UserDatabase/ExtraFields # # Examples: # user_query = SELECT home, uid, gid FROM users WHERE userid = '%u' # user_query = SELECT dir AS home, user AS uid, group AS gid FROM users where userid = '%u' # user_query = SELECT home, 501 AS uid, 501 AS gid FROM users WHERE userid = '%u' # #user_query = \ # SELECT home, uid, gid \ # FROM users WHERE username = '%n' AND domain = '%d' user_query = SELECT CONCAT(homedir, maildir) AS home, CONCAT('maildir:', homedir, maildir) AS mail, uid, gid, CONCAT('*:storage=', quota, 'M') as quota_rule FROM mail_users WHERE (username = '%u' OR email = '%u') # If you wish to avoid two SQL lookups (passdb + userdb), you can use # userdb prefetch instead of userdb sql in dovecot.conf. In that case you'll # also have to return userdb fields in password_query prefixed with "userdb_" # string. For example: #password_query = \ # SELECT userid AS user, password, \ # home AS userdb_home, uid AS userdb_uid, gid AS userdb_gid \ # FROM users WHERE userid = '%u' password_query = SELECT username AS user, password_enc AS password, CONCAT(homedir, maildir) AS userdb_home, uid AS userdb_uid, gid AS userdb_gid, CONCAT('maildir:', homedir, maildir) AS userdb_mail, CONCAT('*:storage=', quota, 'M') as userdb_quota_rule FROM mail_users WHERE (username = '%u' OR email = '%u') AND ((imap = 1 AND '%Ls' = 'imap') OR (pop3 = 1 AND '%Ls' = 'pop3') OR ((postfix = 'Y' AND '%Ls' = 'smtp') OR (postfix = 'Y' AND '%Ls' = 'sieve'))) # Query to get a list of all usernames. #iterate_query = SELECT username AS user FROM mail_users ]]> to characters. For example "#@/@" means # that '#' and '/' characters are translated to '@'. #auth_username_translation = # Username formatting before it's looked up from databases. You can use # the standard variables here, eg. %Lu would lowercase the username, %n would # drop away the domain if it was given, or "%n-AT-%d" would change the '@' into # "-AT-". This translation is done after auth_username_translation changes. #auth_username_format = %Lu # If you want to allow master users to log in by specifying the master # username within the normal username string (ie. not using SASL mechanism's # support for it), you can specify the separator character here. The format # is then . UW-IMAP uses "*" as the # separator, so that could be a good choice. #auth_master_user_separator = # Username to use for users logging in with ANONYMOUS SASL mechanism #auth_anonymous_username = anonymous # Maximum number of dovecot-auth worker processes. They're used to execute # blocking passdb and userdb queries (eg. MySQL and PAM). They're # automatically created and destroyed as needed. #auth_worker_max_count = 30 # Host name to use in GSSAPI principal names. The default is to use the # name returned by gethostname(). Use "$ALL" (with quotes) to allow all keytab # entries. #auth_gssapi_hostname = # Kerberos keytab to use for the GSSAPI mechanism. Will use the system # default (usually /etc/krb5.keytab) if not specified. You may need to change # the auth service to run as root to be able to read this file. #auth_krb5_keytab = # Do NTLM and GSS-SPNEGO authentication using Samba's winbind daemon and # ntlm_auth helper. #auth_use_winbind = no # Path for Samba's ntlm_auth helper binary. #auth_winbind_helper_path = /usr/bin/ntlm_auth # Time to delay before replying to failed authentications. #auth_failure_delay = 2 secs # Require a valid SSL client certificate or the authentication fails. #auth_ssl_require_client_cert = no # Take the username from client's SSL certificate, using # X509_NAME_get_text_by_NID() which returns the subject's DN's # CommonName. #auth_ssl_username_from_cert = no # Space separated list of wanted authentication mechanisms: # plain login digest-md5 cram-md5 ntlm rpa apop anonymous gssapi otp skey # gss-spnego # NOTE: See also disable_plaintext_auth setting. auth_mechanisms = plain login ## ## Password and user databases ## # # Password database is used to verify user's password (and nothing more). # You can have multiple passdbs and userdbs. This is useful if you want to # allow both system users (/etc/passwd) and virtual users to login without # duplicating the system users into virtual database. # # # # User database specifies where mails are located and what user/group IDs # own them. For single-UID configuration use "static" userdb. # # #!include auth-deny.conf.ext #!include auth-master.conf.ext #!include auth-system.conf.ext !include auth-sql.conf.ext #!include auth-ldap.conf.ext #!include auth-passwdfile.conf.ext #!include auth-checkpassword.conf.ext #!include auth-vpopmail.conf.ext #!include auth-static.conf.ext ]]> # mail_location = mbox:~/mail:INBOX=/var/mail/%u # If you need to set multiple mailbox locations or want to change default # namespace settings, you can do it by defining namespace sections. # # You can have private, shared and public namespaces. Private namespaces # are for user's personal mails. Shared namespaces are for accessing other # users' mailboxes that have been shared. Public namespaces are for shared # mailboxes that are managed by sysadmin. If you create any shared or public # namespaces you'll typically want to enable ACL plugin also, otherwise all # users can access all the shared mailboxes, assuming they have permissions # on filesystem level to do so. namespace inbox { # Namespace type: private, shared or public #type = private # Hierarchy separator to use. You should use the same separator for all # namespaces or some clients get confused. '/' is usually a good one. # The default however depends on the underlying mail storage format. #separator = # Prefix required to access this namespace. This needs to be different for # all namespaces. For example "Public/". #prefix = # Physical location of the mailbox. This is in same format as # mail_location, which is also the default for it. #location = # There can be only one INBOX, and this setting defines which namespace # has it. inbox = yes # If namespace is hidden, it's not advertised to clients via NAMESPACE # extension. You'll most likely also want to set list=no. This is mostly # useful when converting from another server with different namespaces which # you want to deprecate but still keep working. For example you can create # hidden namespaces with prefixes "~/mail/", "~%u/mail/" and "mail/". #hidden = no # Show the mailboxes under this namespace with LIST command. This makes the # namespace visible for clients that don't support NAMESPACE extension. # "children" value lists child mailboxes, but hides the namespace prefix. #list = yes # Namespace handles its own subscriptions. If set to "no", the parent # namespace handles them (empty prefix should always have this as "yes") #subscriptions = yes # See 15-mailboxes.conf for definitions of special mailboxes. } # Example shared namespace configuration #namespace { #type = shared #separator = / # Mailboxes are visible under "shared/user@domain/" # %%n, %%d and %%u are expanded to the destination user. #prefix = shared/%%u/ # Mail location for other users' mailboxes. Note that %variables and ~/ # expands to the logged in user's data. %%n, %%d, %%u and %%h expand to the # destination user's data. #location = maildir:%%h/Maildir:INDEX=~/Maildir/shared/%%u # Use the default namespace for saving subscriptions. #subscriptions = no # List the shared/ namespace only if there are visible shared mailboxes. #list = children #} # Should shared INBOX be visible as "shared/user" or "shared/user/INBOX"? #mail_shared_explicit_inbox = no # System user and group used to access mails. If you use multiple, userdb # can override these by returning uid or gid fields. You can use either numbers # or names. #mail_uid = #mail_gid = # Group to enable temporarily for privileged operations. Currently this is # used only with INBOX when either its initial creation or dotlocking fails. # Typically this is set to "mail" to give access to /var/mail. mail_privileged_group = mail # Grant access to these supplementary groups for mail processes. Typically # these are used to set up access to shared mailboxes. Note that it may be # dangerous to set these if users can create symlinks (e.g. if "mail" group is # set here, ln -s /var/mail ~/mail/var could allow a user to delete others' # mailboxes, or ln -s /secret/shared/box ~/mail/mybox would allow reading it). #mail_access_groups = # Allow full filesystem access to clients. There's no access checks other than # what the operating system does for the active UID/GID. It works with both # maildir and mboxes, allowing you to prefix mailboxes names with eg. /path/ # or ~user/. #mail_full_filesystem_access = no # Dictionary for key=value mailbox attributes. This is used for example by # URLAUTH and METADATA extensions. #mail_attribute_dict = # A comment or note that is associated with the server. This value is # accessible for authenticated users through the IMAP METADATA server # entry "/shared/comment". #mail_server_comment = "" # Indicates a method for contacting the server administrator. According to # RFC 5464, this value MUST be a URI (e.g., a mailto: or tel: URL), but that # is currently not enforced. Use for example mailto:admin@example.com. This # value is accessible for authenticated users through the IMAP METADATA server # entry "/shared/admin". #mail_server_admin = ## ## Mail processes ## # Don't use mmap() at all. This is required if you store indexes to shared # filesystems (NFS or clustered filesystem). #mmap_disable = no # Rely on O_EXCL to work when creating dotlock files. NFS supports O_EXCL # since version 3, so this should be safe to use nowadays by default. #dotlock_use_excl = yes # When to use fsync() or fdatasync() calls: # optimized (default): Whenever necessary to avoid losing important data # always: Useful with e.g. NFS when write()s are delayed # never: Never use it (best performance, but crashes can lose data) #mail_fsync = optimized # Locking method for index files. Alternatives are fcntl, flock and dotlock. # Dotlocking uses some tricks which may create more disk I/O than other locking # methods. NFS users: flock doesn't work, remember to change mmap_disable. #lock_method = fcntl # Directory where mails can be temporarily stored. Usually it's used only for # mails larger than >= 128 kB. It's used by various parts of Dovecot, for # example LDA/LMTP while delivering large mails or zlib plugin for keeping # uncompressed mails. #mail_temp_dir = /tmp # Valid UID range for users, defaults to 500 and above. This is mostly # to make sure that users can't log in as daemons or other system users. # Note that denying root logins is hardcoded to dovecot binary and can't # be done even if first_valid_uid is set to 0. #first_valid_uid = 500 #last_valid_uid = 0 # Valid GID range for users, defaults to non-root/wheel. Users having # non-valid GID as primary group ID aren't allowed to log in. If user # belongs to supplementary groups with non-valid GIDs, those groups are # not set. #first_valid_gid = 1 #last_valid_gid = 0 # Maximum allowed length for mail keyword name. It's only forced when trying # to create new keywords. #mail_max_keyword_length = 50 # ':' separated list of directories under which chrooting is allowed for mail # processes (ie. /var/mail will allow chrooting to /var/mail/foo/bar too). # This setting doesn't affect login_chroot, mail_chroot or auth chroot # settings. If this setting is empty, "/./" in home dirs are ignored. # WARNING: Never add directories here which local users can modify, that # may lead to root exploit. Usually this should be done only if you don't # allow shell access for users. #valid_chroot_dirs = # Default chroot directory for mail processes. This can be overridden for # specific users in user database by giving /./ in user's home directory # (eg. /home/./user chroots into /home). Note that usually there is no real # need to do chrooting, Dovecot doesn't allow users to access files outside # their mail directory anyway. If your home directories are prefixed with # the chroot directory, append "/." to mail_chroot. #mail_chroot = # UNIX socket path to master authentication server to find users. # This is used by imap (for shared users) and lda. #auth_socket_path = /var/run/dovecot/auth-userdb # Directory where to look up mail plugins. #mail_plugin_dir = /usr/lib/dovecot/modules # Space separated list of plugins to load for all services. Plugins specific to # IMAP, LDA, etc. are added to this list in their own .conf files. #mail_plugins = ## ## Mailbox handling optimizations ## # Mailbox list indexes can be used to optimize IMAP STATUS commands. They are # also required for IMAP NOTIFY extension to be enabled. #mailbox_list_index = yes # Trust mailbox list index to be up-to-date. This reduces disk I/O at the cost # of potentially returning out-of-date results after e.g. server crashes. # The results will be automatically fixed once the folders are opened. #mailbox_list_index_very_dirty_syncs = yes # Should INBOX be kept up-to-date in the mailbox list index? By default it's # not, because most of the mailbox accesses will open INBOX anyway. #mailbox_list_index_include_inbox = no # The minimum number of mails in a mailbox before updates are done to cache # file. This allows optimizing Dovecot's behavior to do less disk writes at # the cost of more disk reads. #mail_cache_min_mail_count = 0 # When IDLE command is running, mailbox is checked once in a while to see if # there are any new mails or other changes. This setting defines the minimum # time to wait between those checks. Dovecot can also use inotify and # kqueue to find out immediately when changes occur. #mailbox_idle_check_interval = 30 secs # Save mails with CR+LF instead of plain LF. This makes sending those mails # take less CPU, especially with sendfile() syscall with Linux and FreeBSD. # But it also creates a bit more disk I/O which may just make it slower. # Also note that if other software reads the mboxes/maildirs, they may handle # the extra CRs wrong and cause problems. #mail_save_crlf = no # Max number of mails to keep open and prefetch to memory. This only works with # some mailbox formats and/or operating systems. #mail_prefetch_count = 0 # How often to scan for stale temporary files and delete them (0 = never). # These should exist only after Dovecot dies in the middle of saving mails. #mail_temp_scan_interval = 1w # How many slow mail accesses sorting can perform before it returns failure. # With IMAP the reply is: NO [LIMIT] Requested sort would have taken too long. # The untagged SORT reply is still returned, but it's likely not correct. #mail_sort_max_read_count = 0 protocol !indexer-worker { # If folder vsize calculation requires opening more than this many mails from # disk (i.e. mail sizes aren't in cache already), return failure and finish # the calculation via indexer process. Disabled by default. This setting must # be 0 for indexer-worker processes. #mail_vsize_bg_after_count = 0 } ## ## Maildir-specific settings ## # By default LIST command returns all entries in maildir beginning with a dot. # Enabling this option makes Dovecot return only entries which are directories. # This is done by stat()ing each entry, so it causes more disk I/O. # (For systems setting struct dirent->d_type, this check is free and it's # done always regardless of this setting) #maildir_stat_dirs = no # When copying a message, do it with hard links whenever possible. This makes # the performance much better, and it's unlikely to have any side effects. #maildir_copy_with_hardlinks = yes # Assume Dovecot is the only MUA accessing Maildir: Scan cur/ directory only # when its mtime changes unexpectedly or when we can't find the mail otherwise. #maildir_very_dirty_syncs = no # If enabled, Dovecot doesn't use the S= in the Maildir filenames for # getting the mail's physical size, except when recalculating Maildir++ quota. # This can be useful in systems where a lot of the Maildir filenames have a # broken size. The performance hit for enabling this is very small. #maildir_broken_filename_sizes = no # Always move mails from new/ directory to cur/, even when the \Recent flags # aren't being reset. #maildir_empty_new = no ## ## mbox-specific settings ## # Which locking methods to use for locking mbox. There are four available: # dotlock: Create .lock file. This is the oldest and most NFS-safe # solution. If you want to use /var/mail/ like directory, the users # will need write access to that directory. # dotlock_try: Same as dotlock, but if it fails because of permissions or # because there isn't enough disk space, just skip it. # fcntl : Use this if possible. Works with NFS too if lockd is used. # flock : May not exist in all systems. Doesn't work with NFS. # lockf : May not exist in all systems. Doesn't work with NFS. # # You can use multiple locking methods; if you do the order they're declared # in is important to avoid deadlocks if other MTAs/MUAs are using multiple # locking methods as well. Some operating systems don't allow using some of # them simultaneously. # # The Debian value for mbox_write_locks differs from upstream Dovecot. It is # changed to be compliant with Debian Policy (section 11.6) for NFS safety. # Dovecot: mbox_write_locks = dotlock fcntl # Debian: mbox_write_locks = fcntl dotlock # #mbox_read_locks = fcntl #mbox_write_locks = fcntl dotlock # Maximum time to wait for lock (all of them) before aborting. #mbox_lock_timeout = 5 mins # If dotlock exists but the mailbox isn't modified in any way, override the # lock file after this much time. #mbox_dotlock_change_timeout = 2 mins # When mbox changes unexpectedly we have to fully read it to find out what # changed. If the mbox is large this can take a long time. Since the change # is usually just a newly appended mail, it'd be faster to simply read the # new mails. If this setting is enabled, Dovecot does this but still safely # fallbacks to re-reading the whole mbox file whenever something in mbox isn't # how it's expected to be. The only real downside to this setting is that if # some other MUA changes message flags, Dovecot doesn't notice it immediately. # Note that a full sync is done with SELECT, EXAMINE, EXPUNGE and CHECK # commands. #mbox_dirty_syncs = yes # Like mbox_dirty_syncs, but don't do full syncs even with SELECT, EXAMINE, # EXPUNGE or CHECK commands. If this is set, mbox_dirty_syncs is ignored. #mbox_very_dirty_syncs = no # Delay writing mbox headers until doing a full write sync (EXPUNGE and CHECK # commands and when closing the mailbox). This is especially useful for POP3 # where clients often delete all mails. The downside is that our changes # aren't immediately visible to other MUAs. #mbox_lazy_writes = yes # If mbox size is smaller than this (e.g. 100k), don't write index files. # If an index file already exists it's still read, just not updated. #mbox_min_index_size = 0 # Mail header selection algorithm to use for MD5 POP3 UIDLs when # pop3_uidl_format=%m. For backwards compatibility we use apop3d inspired # algorithm, but it fails if the first Received: header isn't unique in all # mails. An alternative algorithm is "all" that selects all headers. #mbox_md5 = apop3d ## ## mdbox-specific settings ## # Maximum dbox file size until it's rotated. #mdbox_rotate_size = 10M # Maximum dbox file age until it's rotated. Typically in days. Day begins # from midnight, so 1d = today, 2d = yesterday, etc. 0 = check disabled. #mdbox_rotate_interval = 0 # When creating new mdbox files, immediately preallocate their size to # mdbox_rotate_size. This setting currently works only in Linux with some # filesystems (ext4, xfs). #mdbox_preallocate_space = no ## ## Mail attachments ## # sdbox and mdbox support saving mail attachments to external files, which # also allows single instance storage for them. Other backends don't support # this for now. # Directory root where to store mail attachments. Disabled, if empty. #mail_attachment_dir = # Attachments smaller than this aren't saved externally. It's also possible to # write a plugin to disable saving specific attachments externally. #mail_attachment_min_size = 128k # Filesystem backend to use for saving attachments: # posix : No SiS done by Dovecot (but this might help FS's own deduplication) # sis posix : SiS with immediate byte-by-byte comparison during saving # sis-queue posix : SiS with delayed comparison and deduplication #mail_attachment_fs = sis posix # Hash format to use in attachment filenames. You can add any text and # variables: %{md4}, %{md5}, %{sha1}, %{sha256}, %{sha512}, %{size}. # Variables can be truncated, e.g. %{sha256:80} returns only first 80 bits #mail_attachment_hash = %{sha1} # Settings to control adding $HasAttachment or $HasNoAttachment keywords. # By default, all MIME parts with Content-Disposition=attachment, or inlines # with filename parameter are consired attachments. # add-flags-on-save - Add the keywords when saving new mails. # content-type=type or !type - Include/exclude content type. Excluding will # never consider the matched MIME part as attachment. Including will only # negate an exclusion (e.g. content-type=!foo/* content-type=foo/bar). # exclude-inlined - Exclude any Content-Disposition=inline MIME part. #mail_attachment_detection_options = ]]> #service_count = 1 # Number of processes to always keep waiting for more connections. #process_min_avail = 0 # If you set service_count=0, you probably need to grow this. #vsz_limit = $default_vsz_limit } service pop3-login { inet_listener pop3 { #port = 110 } inet_listener pop3s { #port = 995 #ssl = yes } } service submission-login { inet_listener submission { #port = 587 } } service lmtp { unix_listener lmtp { #mode = 0666 } # Create inet listener only if you can't use the above UNIX socket #inet_listener lmtp { # Avoid making LMTP visible for the entire internet #address = #port = #} } service imap { # Most of the memory goes to mmap()ing files. You may need to increase this # limit if you have huge mailboxes. #vsz_limit = $default_vsz_limit # Max. number of IMAP processes (connections) #process_limit = 1024 } service pop3 { # Max. number of POP3 processes (connections) #process_limit = 1024 } service submission { # Max. number of SMTP Submission processes (connections) #process_limit = 1024 } service auth { # auth_socket_path points to this userdb socket by default. It's typically # used by dovecot-lda, doveadm, possibly imap process, etc. Users that have # full permissions to this socket are able to get a list of all usernames and # get the results of everyone's userdb lookups. # # The default 0666 mode allows anyone to connect to the socket, but the # userdb lookups will succeed only if the userdb returns an "uid" field that # matches the caller process's UID. Also if caller's uid or gid matches the # socket's uid or gid the lookup succeeds. Anything else causes a failure. # # To give the caller full permissions to lookup all users, set the mode to # something else than 0666 and Dovecot lets the kernel enforce the # permissions (e.g. 0777 allows everyone full permissions). unix_listener auth-userdb { #mode = 0666 #user = #group = } # Postfix smtp-auth unix_listener /var/spool/postfix/private/auth { mode = 0660 user = postfix group = postfix } # Exim4 smtp-auth unix_listener auth-client { mode = 0660 user = mail #group = Debian-exim } # Auth process is run as this user. #user = $default_internal_user } service auth-worker { # Auth worker process is run as root by default, so that it can access # /etc/shadow. If this isn't necessary, the user should be changed to # $default_internal_user. #user = root } service dict { # If dict proxy is used, mail processes should have access to its socket. # For example: mode=0660, group=vmail and global mail_access_groups=vmail unix_listener dict { #mode = 0600 #user = #group = } } service stats { unix_listener stats-reader { group = vmail mode = 0666 } unix_listener stats-writer { group = vmail mode = 0666 } } ]]> ssl = yes # PEM encoded X.509 SSL/TLS certificate and private key. They're opened before # dropping root privileges, so keep the key file unreadable by anyone but # root. Included doc/mkcert.sh can be used to easily generate self-signed # certificate, just make sure to update the domains in dovecot-openssl.cnf ssl_cert = # Hostname to use in various parts of sent mails (e.g. in Message-Id) and # in LMTP replies. Default is the system's real hostname@domain. #hostname = # If user is over quota, return with temporary failure instead of # bouncing the mail. #quota_full_tempfail = no # Binary to use for sending mails. #sendmail_path = /usr/sbin/sendmail # If non-empty, send mails via this SMTP host[:port] instead of sendmail. #submission_host = # Subject: header to use for rejection mails. You can use the same variables # as for rejection_reason below. #rejection_subject = Rejected: %s # Human readable error message for rejection mails. You can use variables: # %n = CRLF, %r = reason, %s = original subject, %t = recipient #rejection_reason = Your message to <%t> was automatically rejected:%n%r # Delimiter character between local-part and detail in email address. #recipient_delimiter = + # Header where the original recipient address (SMTP's RCPT TO: address) is taken # from if not available elsewhere. With dovecot-lda -a parameter overrides this. # A commonly used header for this is X-Original-To. #lda_original_recipient_header = # Should saving a mail to a nonexistent mailbox automatically create it? #lda_mailbox_autocreate = no # Should automatically created mailboxes be also automatically subscribed? #lda_mailbox_autosubscribe = no protocol lda { # Space separated list of plugins to load (default is global mail_plugins). #mail_plugins = $mail_plugins } ]]> #service_count = 1 # Number of processes to always keep waiting for more connections. #process_min_avail = 0 # If you set service_count=0, you probably need to grow this. #vsz_limit = 64M #} #service managesieve { # Max. number of ManageSieve processes (connections) #process_limit = 1024 #} # Service configuration protocol sieve { # Maximum ManageSieve command line length in bytes. ManageSieve usually does # not involve overly long command lines, so this setting will not normally # need adjustment #managesieve_max_line_length = 65536 # Maximum number of ManageSieve connections allowed for a user from each IP # address. # NOTE: The username is compared case-sensitively. #mail_max_userip_connections = 10 # Space separated list of plugins to load (none known to be useful so far). # Do NOT try to load IMAP plugins here. #mail_plugins = # MANAGESIEVE logout format string: # %i - total number of bytes read from client # %o - total number of bytes sent to client # %{put_bytes} - Number of bytes saved using PUTSCRIPT command # %{put_count} - Number of scripts saved using PUTSCRIPT command # %{get_bytes} - Number of bytes read using GETCRIPT command # %{get_count} - Number of scripts read using GETSCRIPT command # %{get_bytes} - Number of bytes processed using CHECKSCRIPT command # %{get_count} - Number of scripts checked using CHECKSCRIPT command # %{deleted_count} - Number of scripts deleted using DELETESCRIPT command # %{renamed_count} - Number of scripts renamed using RENAMESCRIPT command #managesieve_logout_format = bytes=%i/%o # To fool ManageSieve clients that are focused on CMU's timesieved you can # specify the IMPLEMENTATION capability that Dovecot reports to clients. # For example: 'Cyrus timsieved v2.2.13' #managesieve_implementation_string = Dovecot Pigeonhole # Explicitly specify the SIEVE and NOTIFY capability reported by the server # before login. If left unassigned these will be reported dynamically # according to what the Sieve interpreter supports by default (after login # this may differ depending on the user). #managesieve_sieve_capability = #managesieve_notify_capability = # The maximum number of compile errors that are returned to the client upon # script upload or script verification. #managesieve_max_compile_errors = 5 # Refer to 90-sieve.conf for script quota configuration and configuration of # Sieve execution limits. } ]]> = 2.1.4) : %v.%u # Dovecot v0.99.x : %v.%u # tpop3d : %Mf # # Note that Outlook 2003 seems to have problems with %v.%u format which was # Dovecot's default, so if you're building a new server it would be a good # idea to change this. %08Xu%08Xv should be pretty fail-safe. # #pop3_uidl_format = %08Xu%08Xv # Permanently save UIDLs sent to POP3 clients, so pop3_uidl_format changes # won't change those UIDLs. Currently this works only with Maildir. #pop3_save_uidl = no # What to do about duplicate UIDLs if they exist? # allow: Show duplicates to clients. # rename: Append a temporary -2, -3, etc. counter after the UIDL. #pop3_uidl_duplicates = allow # This option changes POP3 behavior so that it's not possible to actually # delete mails via POP3, only hide them from future POP3 sessions. The mails # will still be counted towards user's quota until actually deleted via IMAP. # Use e.g. "$POP3Deleted" as the value (it will be visible as IMAP keyword). # Make sure you can legally archive mails before enabling this setting. #pop3_deleted_flag = # POP3 logout format string: # %i - total number of bytes read from client # %o - total number of bytes sent to client # %t - number of TOP commands # %p - number of bytes sent to client as a result of TOP command # %r - number of RETR commands # %b - number of bytes sent to client as a result of RETR command # %d - number of deleted messages # %{deleted_bytes} - number of bytes in deleted messages # %m - number of messages (before deletion) # %s - mailbox size in bytes (before deletion) # %u - old/new UIDL hash. may help finding out if UIDLs changed unexpectedly pop3_logout_format = in=%i out=%o top=%t/%p, retr=%r/%b, del=%d/%m, size=%s # Workarounds for various client bugs: # outlook-no-nuls: # Outlook and Outlook Express hang if mails contain NUL characters. # This setting replaces them with 0x80 character. # oe-ns-eoh: # Outlook Express and Netscape Mail breaks if end of headers-line is # missing. This option simply sends it if it's missing. # The list is space-separated. #pop3_client_workarounds = protocol pop3 { # Space separated list of plugins to load (default is global mail_plugins). #mail_plugins = $mail_plugins # Maximum number of POP3 connections allowed for a user from each IP address. # NOTE: The username is compared case-sensitively. #mail_max_userip_connections = 10 } ]]> :]path[;[=][;...]] # # If the type prefix is omitted, the script location type is 'file' and the # location is interpreted as a local filesystem path pointing to a Sieve script # file or directory. Refer to Pigeonhole wiki or INSTALL file for more # information. plugin { # The location of the user's main Sieve script or script storage. The LDA # Sieve plugin uses this to find the active script for Sieve filtering at # delivery. The "include" extension uses this location for retrieving # :personal" scripts. This is also where the ManageSieve service will store # the user's scripts, if supported. # # Currently only the 'file:' location type supports ManageSieve operation. # Other location types like 'dict:' and 'ldap:' can currently only # be used as a read-only script source (). # # For the 'file:' type: use the ';active=' parameter to specify where the # active script symlink is located. # For other types: use the ';name=' parameter to specify the name of the # default/active script. sieve = file:~/sieve;active=~/.dovecot.sieve # The default Sieve script when the user has none. This is the location of a # global sieve script file, which gets executed ONLY if user's personal Sieve # script doesn't exist. Be sure to pre-compile this script manually using the # sievec command line tool if the binary is not stored in a global location. # --> See sieve_before for executing scripts before the user's personal # script. #sieve_default = /var/lib/dovecot/sieve/default.sieve sieve_dir = ~/sieve # The name by which the default Sieve script (as configured by the # sieve_default setting) is visible to the user through ManageSieve. #sieve_default_name = # Location for ":global" include scripts as used by the "include" extension. #sieve_global = # The location of a Sieve script that is run for any message that is about to # be discarded; i.e., it is not delivered anywhere by the normal Sieve # execution. This only happens when the "implicit keep" is canceled, by e.g. # the "discard" action, and no actions that deliver the message are executed. # This "discard script" can prevent discarding the message, by executing # alternative actions. If the discard script does nothing, the message is # still discarded as it would be when no discard script is configured. #sieve_discard = # Location Sieve of scripts that need to be executed before the user's # personal script. If a 'file' location path points to a directory, all the # Sieve scripts contained therein (with the proper `.sieve' extension) are # executed. The order of execution within that directory is determined by the # file names, using a normal 8bit per-character comparison. # # Multiple script locations can be specified by appending an increasing number # to the setting name. The Sieve scripts found from these locations are added # to the script execution sequence in the specified order. Reading the # numbered sieve_before settings stops at the first missing setting, so no # numbers may be skipped. #sieve_before = /var/lib/dovecot/sieve.d/ #sieve_before2 = ldap:/etc/sieve-ldap.conf;name=ldap-domain #sieve_before3 = (etc...) # Identical to sieve_before, only the specified scripts are executed after the # user's script (only when keep is still in effect!). Multiple script # locations can be specified by appending an increasing number. #sieve_after = #sieve_after2 = #sieve_after2 = (etc...) # Which Sieve language extensions are available to users. By default, all # supported extensions are available, except for deprecated extensions or # those that are still under development. Some system administrators may want # to disable certain Sieve extensions or enable those that are not available # by default. This setting can use '+' and '-' to specify differences relative # to the default. For example `sieve_extensions = +imapflags' will enable the # deprecated imapflags extension in addition to all extensions were already # enabled by default. #sieve_extensions = +notify +imapflags # Which Sieve language extensions are ONLY available in global scripts. This # can be used to restrict the use of certain Sieve extensions to administrator # control, for instance when these extensions can cause security concerns. # This setting has higher precedence than the `sieve_extensions' setting # (above), meaning that the extensions enabled with this setting are never # available to the user's personal script no matter what is specified for the # `sieve_extensions' setting. The syntax of this setting is similar to the # `sieve_extensions' setting, with the difference that extensions are # enabled or disabled for exclusive use in global scripts. Currently, no # extensions are marked as such by default. #sieve_global_extensions = # The Pigeonhole Sieve interpreter can have plugins of its own. Using this # setting, the used plugins can be specified. Check the Dovecot wiki # (wiki2.dovecot.org) or the pigeonhole website # (http://pigeonhole.dovecot.org) for available plugins. # The sieve_extprograms plugin is included in this release. #sieve_plugins = # The separator that is expected between the :user and :detail # address parts introduced by the subaddress extension. This may # also be a sequence of characters (e.g. '--'). The current # implementation looks for the separator from the left of the # localpart and uses the first one encountered. The :user part is # left of the separator and the :detail part is right. This setting # is also used by Dovecot's LMTP service. #recipient_delimiter = + # The maximum size of a Sieve script. The compiler will refuse to compile any # script larger than this limit. If set to 0, no limit on the script size is # enforced. #sieve_max_script_size = 1M # The maximum number of actions that can be performed during a single script # execution. If set to 0, no limit on the total number of actions is enforced. #sieve_max_actions = 32 # The maximum number of redirect actions that can be performed during a single # script execution. If set to 0, no redirect actions are allowed. #sieve_max_redirects = 4 # The maximum number of personal Sieve scripts a single user can have. If set # to 0, no limit on the number of scripts is enforced. # (Currently only relevant for ManageSieve) #sieve_quota_max_scripts = 0 # The maximum amount of disk storage a single user's scripts may occupy. If # set to 0, no limit on the used amount of disk storage is enforced. # (Currently only relevant for ManageSieve) #sieve_quota_max_storage = 0 # The primary e-mail address for the user. This is used as a default when no # other appropriate address is available for sending messages. If this setting # is not configured, either the postmaster or null "<>" address is used as a # sender, depending on the action involved. This setting is important when # there is no message envelope to extract addresses from, such as when the # script is executed in IMAP. #sieve_user_email = # The path to the file where the user log is written. If not configured, a # default location is used. If the main user's personal Sieve (as configured # with sieve=) is a file, the logfile is set to .log by default. If # it is not a file, the default user log file is ~/.dovecot.sieve.log. #sieve_user_log = # Specifies what envelope sender address is used for redirected messages. # The following values are supported for this setting: # # "sender" - The sender address is used (default). # "recipient" - The final recipient address is used. # "orig_recipient" - The original recipient is used. # "user_email" - The user's primary address is used. This is # configured with the "sieve_user_email" setting. If # that setting is unconfigured, "user_mail" is equal to # "recipient". # "postmaster" - The postmaster_address configured for the LDA. # "" - Redirected messages are always sent from user@domain. # The angle brackets are mandatory. The null "<>" address # is also supported. # # This setting is ignored when the envelope sender is "<>". In that case the # sender of the redirected message is also always "<>". #sieve_redirect_envelope_from = sender ## TRACE DEBUGGING # Trace debugging provides detailed insight in the operations performed by # the Sieve script. These settings apply to both the LDA Sieve plugin and the # IMAPSIEVE plugin. # # WARNING: On a busy server, this functionality can quickly fill up the trace # directory with a lot of trace files. Enable this only temporarily and as # selective as possible. # The directory where trace files are written. Trace debugging is disabled if # this setting is not configured or if the directory does not exist. If the # path is relative or it starts with "~/" it is interpreted relative to the # current user's home directory. #sieve_trace_dir = # The verbosity level of the trace messages. Trace debugging is disabled if # this setting is not configured. Possible values are: # # "actions" - Only print executed action commands, like keep, # fileinto, reject and redirect. # "commands" - Print any executed command, excluding test commands. # "tests" - Print all executed commands and performed tests. # "matching" - Print all executed commands, performed tests and the # values matched in those tests. #sieve_trace_level = # Enables highly verbose debugging messages that are usually only useful for # developers. #sieve_trace_debug = no # Enables showing byte code addresses in the trace output, rather than only # the source line numbers. #sieve_trace_addresses = no } ]]> //service[@type='mail']/general/installs[@index=1] //service[@type='mail']/general/files[@index=1] //service[@type='mail']/general/commands[@index=1] " [ -f /etc/ssl/certs/proftpd_ec.crt ] || openssl req -new -x509 -nodes -newkey ec:<(openssl ecparam -name secp521r1) -keyout /etc/ssl/private/proftpd_ec.key -out /etc/ssl/certs/proftpd_ec.crt -days 3650 -subj "/C=US/ST=Some-State/O=Internet Widgits Pty Ltd/CN=" chmod 0600 /etc/ssl/private/proftpd.key /etc/ssl/private/proftpd_ec.key ]]> FTP Server" ServerType standalone DeferWelcome off MultilineRFC2228 on DefaultServer on ShowSymlinks on TimeoutNoTransfer 600 TimeoutStalled 600 TimeoutIdle 1200 DisplayLogin welcome.msg DisplayChdir .message true ListOptions "-l" DenyFilter \*.*/ # Use this to jail all users in their homes # DefaultRoot ~ # Users require a valid shell listed in /etc/shells to login. # Use this directive to release that constrain. # RequireValidShell off # Port 21 is the standard FTP port. Port 21 # In some cases you have to specify passive ports range to by-pass # firewall limitations. Ephemeral ports can be used for that, but # feel free to use a more narrow range. # PassivePorts 49152 65534 # If your host was NATted, this option is useful in order to # allow passive tranfers to work. You have to use your public # address and opening the passive ports used on your firewall as well. # MasqueradeAddress 1.2.3.4 # This is useful for masquerading address with dynamic IPs: # refresh any configured MasqueradeAddress directives every 8 hours # DynMasqRefresh 28800 # To prevent DoS attacks, set the maximum number of child processes # to 30. If you need to allow more than 30 concurrent connections # at once, simply increase this value. Note that this ONLY works # in standalone mode, in inetd mode you should use an inetd server # that allows you to limit maximum number of processes per service # (such as xinetd) MaxInstances 30 # Set the user and group that the server normally runs at. User proftpd Group nogroup # Umask 022 is a good standard umask to prevent new files and dirs # (second parm) from being group and world writable. Umask 022 022 # Normally, we want files to be overwriteable. AllowOverwrite on # Uncomment this if you are using NIS or LDAP via NSS to retrieve passwords: # PersistentPasswd off # This is required to use both PAM-based authentication and local passwords # AuthOrder mod_auth_pam.c* mod_auth_unix.c # Be warned: use of this directive impacts CPU average load! # Uncomment this if you like to see progress and transfer rate with ftpwho # in downloads. That is not needed for uploads rates. # # UseSendFile off TransferLog /var/log/proftpd/xferlog SystemLog /var/log/proftpd/proftpd.log # Logging onto /var/log/lastlog is enabled but set to off by default #UseLastlog on # In order to keep log file dates consistent after chroot, use timezone info # from /etc/localtime. If this is not set, and proftpd is configured to # chroot (e.g. DefaultRoot or ), it will use the non-daylight # savings timezone regardless of whether DST is in effect. #SetEnv TZ :/etc/localtime QuotaEngine on Ratios off # Delay engine reduces impact of the so-called Timing Attack described in # http://www.securityfocus.com/bid/11430/discuss # It is on by default. DelayEngine on ControlsEngine off ControlsMaxClients 2 ControlsLog /var/log/proftpd/controls.log ControlsInterval 5 ControlsSocket /var/run/proftpd/proftpd.sock AdminControlsEngine off # # Alternative authentication frameworks # #Include /etc/proftpd/ldap.conf Include /etc/proftpd/sql.conf # # This is used for FTPS connections # Include /etc/proftpd/tls.conf # # Useful to keep VirtualHost/VirtualRoot directives separated # #Include /etc/proftpd/virtuals.conf # A basic anonymous configuration, no upload directories. # # User ftp # Group nogroup # # We want clients to be able to login with "anonymous" as well as "ftp" # UserAlias anonymous ftp # # Cosmetic changes, all files belongs to ftp user # DirFakeUser on ftp # DirFakeGroup on ftp # # RequireValidShell off # # # Limit the maximum number of anonymous logins # MaxClients 10 # # # We want 'welcome.msg' displayed at login, and '.message' displayed # # in each newly chdired directory. # DisplayLogin welcome.msg # DisplayChdir .message # # # Limit WRITE everywhere in the anonymous chroot # # # DenyAll # # # # # Uncomment this if you're brave. # # # # # Umask 022 is a good standard umask to prevent new files and dirs # # # (second parm) from being group and world writable. # # Umask 022 022 # # # # DenyAll # # # # # # AllowAll # # # # # # # Include other custom configuration files Include /etc/proftpd/conf.d/ ]]> DefaultRoot ~ RequireValidShell off AuthOrder mod_sql.c # # Choose a SQL backend among MySQL or PostgreSQL. # Both modules are loaded in default configuration, so you have to specify the backend # or comment out the unused module in /etc/proftpd/modules.conf. # Use 'mysql' or 'postgres' as possible values. # SQLBackend mysql # SQLEngine on SQLAuthenticate on # # Use both a crypted or plaintext password SQLAuthTypes Crypt SQLAuthenticate users* groups* # # Connection SQLConnectInfo @ # # Describes both users/groups tables # SQLUserInfo ftp_users username password uid gid homedir shell SQLGroupInfo ftp_groups groupname gid members # SQLUserWhereClause "login_enabled = 'y'" SQLLog PASS login SQLNamedQuery login UPDATE "last_login=now(), login_count=login_count+1 WHERE username='%u'" ftp_users SQLLog RETR download SQLNamedQuery download UPDATE "down_count=down_count+1, down_bytes=down_bytes+%b WHERE username='%u'" ftp_users SQLLog STOR upload SQLNamedQuery upload UPDATE "up_count=up_count+1, up_bytes=up_bytes+%b WHERE username='%u'" ftp_users QuotaEngine on QuotaShowQuotas on QuotaDisplayUnits Mb QuotaLock /var/lock/ftpd.quotatab.lock QuotaLimitTable sql:/get-quota-limit QuotaTallyTable sql:/get-quota-tally/update-quota-tally/insert-quota-tally SQLNamedQuery get-quota-limit SELECT "ftp_users.username AS name, ftp_quotalimits.quota_type, ftp_quotalimits.per_session, ftp_quotalimits.limit_type, panel_customers.diskspace*1024 AS bytes_in_avail, ftp_quotalimits.bytes_out_avail, ftp_quotalimits.bytes_xfer_avail, ftp_quotalimits.files_in_avail, ftp_quotalimits.files_out_avail, ftp_quotalimits.files_xfer_avail FROM ftp_users, ftp_quotalimits, panel_customers WHERE ftp_users.username = '%{0}' AND panel_customers.loginname = SUBSTRING_INDEX('%{0}', 'ftp', 1) AND quota_type ='%{1}'" SQLNamedQuery get-quota-tally SELECT "name, quota_type, bytes_in_used,bytes_out_used, bytes_xfer_used, files_in_used, files_out_used,files_xfer_used FROM ftp_quotatallies WHERE name = '%{0}' AND quota_type = '%{1}'" SQLNamedQuery update-quota-tally UPDATE "bytes_in_used = bytes_in_used + %{0}, bytes_out_used = bytes_out_used + %{1}, bytes_xfer_used = bytes_xfer_used + %{2}, files_in_used = files_in_used + %{3}, files_out_used= files_out_used + %{4}, files_xfer_used = files_xfer_used + %{5} WHERE name= '%{6}' AND quota_type = '%{7}'" ftp_quotatallies SQLNamedQuery insert-quota-tally INSERT "%{0}, %{1}, %{2}, %{3}, %{4},%{5}, %{6}, %{7}" ftp_quotatallies ]]> TLSEngine on TLSLog /var/log/proftpd/tls.log TLSProtocol TLSv1 TLSv1.1 TLSv1.2 TLSRSACertificateFile /etc/ssl/certs/proftpd.crt TLSRSACertificateKeyFile /etc/ssl/private/proftpd.key TLSECCertificateFile /etc/ssl/certs/proftpd_ec.crt TLSECCertificateKeyFile /etc/ssl/private/proftpd_ec.key TLSOptions NoCertRequest NoSessionReuseRequired TLSVerifyClient off # Are clients required to use FTP over TLS when talking to this server? #TLSRequired on # Allow SSL/TLS renegotiations when the client requests them, but # do not force the renegotations. Some clients do not support # SSL/TLS renegotiations; when mod_tls forces a renegotiation, these # clients will close the data connection, or there will be a timeout # on an idle data connection. # #TLSRenegotiate required off ]]> # Mandatory : user password. You must have a password. MYSQLPassword # Mandatory : database to open. MYSQLDatabase # Mandatory : how passwords are stored # Valid values are : "cleartext", "crypt", "sha1", "md5" and "password" # ("password" = MySQL password() function) # You can also use "any" to try "crypt", "sha1", "md5" *and* "password" MYSQLCrypt any # In the following directives, parts of the strings are replaced at # run-time before performing queries : # # \L is replaced by the login of the user trying to authenticate. # \I is replaced by the IP address the user connected to. # \P is replaced by the port number the user connected to. # \R is replaced by the IP address the user connected from. # \D is replaced by the remote IP address, as a long decimal number. # # Very complex queries can be performed using these substitution strings, # especially for virtual hosting. # Query to execute in order to fetch the password MYSQLGetPW SELECT password FROM ftp_users WHERE username="\L" AND login_enabled="y" # Query to execute in order to fetch the system user name or uid MYSQLGetUID SELECT uid FROM ftp_users WHERE username="\L" AND login_enabled="y" # Optional : default UID - if set this overrides MYSQLGetUID #MYSQLDefaultUID 1000 # Query to execute in order to fetch the system user group or gid MYSQLGetGID SELECT gid FROM ftp_users WHERE username="\L" AND login_enabled="y" # Optional : default GID - if set this overrides MYSQLGetGID #MYSQLDefaultGID 1000 # Query to execute in order to fetch the home directory MYSQLGetDir SELECT homedir FROM ftp_users WHERE username="\L" AND login_enabled="y" # Optional : query to get the maximal number of files # Pure-FTPd must have been compiled with virtual quotas support. # MySQLGetQTAFS SELECT QuotaFiles FROM users WHERE User='\L' # Optional : query to get the maximal disk usage (virtual quotas) # The number should be in Megabytes. # Pure-FTPd must have been compiled with virtual quotas support. MySQLGetQTASZ SELECT panel_customers.diskspace/1024 AS QuotaSize FROM panel_customers, ftp_users WHERE username = "\L" AND panel_customers.loginname = SUBSTRING_INDEX('\L', 'ftp', 1) # Optional : ratios. The server has to be compiled with ratio support. # MySQLGetRatioUL SELECT ULRatio FROM users WHERE User='\L' # MySQLGetRatioDL SELECT DLRatio FROM users WHERE User='\L' # Optional : bandwidth throttling. # The server has to be compiled with throttling support. # Values are in KB/s . # MySQLGetBandwidthUL SELECT ULBandwidth FROM users WHERE User='\L' # MySQLGetBandwidthDL SELECT DLBandwidth FROM users WHERE User='\L' # Enable ~ expansion. NEVER ENABLE THIS BLINDLY UNLESS : # 1) You know what you are doing. # 2) Real and virtual users match. # MySQLForceTildeExpansion 1 # If you're using a transactionnal storage engine, you can enable SQL # transactions to avoid races. Leave this commented if you are using the # traditional MyIsam engine. # MySQLTransactions On ]]> scripts/froxlor_master_cronjob.php --run-task 99]]> *.log { missingok daily rotate 7 compress delaycompress notifempty create sharedscripts postrotate > /dev/null 2>&1 || true endscript } ]]> {{settings.system.mod_fcgid_ownvhost}} {{settings.system.webserver}} {{settings.system.webserver}} {{settings.phpfpm.enabled_ownvhost}} {{settings.phpfpm.vhost_httpuser}} {{settings.system.webserver}} {{settings.phpfpm.enabled_ownvhost}} {{settings.system.webserver}}